A trimmer is a miniature adjustable electrical component. It is meant to be set correctly when installed in some device, and never seen or adjusted by the device's user. Trimmers can be variable resistors (potentiometers), variable capacitors, or trimmable inductors. They are common in precision circuitry like A/V components, and may need to be adjusted when the equipment is serviced. Trimpots are often used to initially calibrate equipment after manufacturing. Unlike many other variable controls, trimmers are mounted directly on circuit boards, turned with a small screwdriver and rated for many fewer adjustments over their lifetime. Trimmers like trimmable inductors and trimmable capacitors are usually found in superhet radio and television receivers, in the intermediate frequency (IF), oscillator and radio frequency (RF) circuits. They are adjusted into the right position during the alignment procedure of the receiver.
Trimmers come in a variety of sizes and levels of precision. For example, multi-turn trim potentiometers exist, in which it takes several turns of the adjustment screw to reach the end value. This allows for very high degrees of accuracy. Often they make use of a worm-gear (rotary track) or a leadscrew (linear track).
100R (101 - Retangle), 100K (104 - Rectangle), 100K (104 - Square), 100K (104), 100R (101), 10K (103 - Rectangle), 10K (103), 1K (102 - Rectangle), 1K (102), 1M (105), 200K (204), 200R (201 - Rectangle), 20K (203 - Rectangle), 20K (203), 220R (221), 2K (202 - Rectangle), 3.3K (332), 300K (304), 30K (303), 4.7K (472), 470R (471), 47K (473), 500K (504 - Rectangle), 500K (504), 500R (501 - Rectangle), 50K (503) , 5K (502 - Rectangle)
To help get a better understanding of this component, why not have a crack at one of these funky STEM Modules!
Click on the model below and move your mouse to rotate or if you're feeling a little adventurous, why not click the "ZOOM" link and take a closer look!
Ayr, South Ayrshire, Scotland
+44 (0000) 000000
Email One : firstname.lastname@example.org